MECHANICAL SPECIFICATIONS
• Maximum Actuation Force:Level 2 Sensitivity: < 5 lbs. (22.2 N)ADA Complient
• Materials: Stainless Steel (316),Aluminum (6061) with Type II Anodization
• Mechanism: 100% Solid-state, No Moving Parts
• Operational Life: Tested +20MM cycles, -60C to 85C (Typical)
• Mounting Panel Thickness: 0.0625” (1.58mm) to0.500” (12.7mm)
• Mounting Panel Thickness with orientedDouble “D” Flats: 0.090” (2.3mm) to0.500” (12.7mm)
• Mounting: Brass Nut (15 Inch Pounds—Max),AS568A-019 Butyl Rubber O-ring
ELECTRICAL SPECIFICATIONS
• Voltage: +5 VDC ± 5%, or+10–24 VDC
• Current: 100mA
• Contact Resistance: None
• Contact Bounce: None
• EMI/RFI: No Effect
• ESD: 25kv in each method
• Wire Leads: 24 AWG,12” long,105C Insulation
FUNCTIONAL OPERATION SPECIFICATIONS
• Momentary / Alternate
• Normally Open / Normally Closed(Open Collector Output)
• Normally High, 5V / Normally Low, 0V(Digital Output)
• Make / Break via TransistorPANEL CUTOUTS:0.748 0.000+0.01019.00 0.00+0.25
ENVIRONMENTAL SPECIFICATIONS
• Operating Temperature Range: -40° C to +85° C (Typical)
• Storage Temperature Range: -60° C to +165° C (Typical)
• Relative Humidity: No Effect
• Ingress Protection: IP68 (submerged in 3 feet without apanel for 96 hours)
• SHock: Tested to 30g in each Axis(drop test from 20 ft to concrete)
• Vibration: Tested at 4 hours each Axis
(actuated during vibration)
• Impact: 1kg SHock Test
• Maximum Actuation Force:Level 2 Sensitivity: < 5 lbs. (22.2 N)ADA Complient
• Materials: Stainless Steel (316),Aluminum (6061) with Type II Anodization
• Mechanism: 100% Solid-state, No Moving Parts
• Operational Life: Tested +20MM cycles, -60C to 85C (Typical)
• Mounting Panel Thickness: 0.0625” (1.58mm) to0.500” (12.7mm)
• Mounting Panel Thickness with orientedDouble “D” Flats: 0.090” (2.3mm) to0.500” (12.7mm)
• Mounting: Brass Nut (15 Inch Pounds—Max),AS568A-019 Butyl Rubber O-ring
ELECTRICAL SPECIFICATIONS
• Voltage: +5 VDC ± 5%, or+10–24 VDC
• Current: 100mA
• Contact Resistance: None
• Contact Bounce: None
• EMI/RFI: No Effect
• ESD: 25kv in each method
• Wire Leads: 24 AWG,12” long,105C Insulation
FUNCTIONAL OPERATION SPECIFICATIONS
• Momentary / Alternate
• Normally Open / Normally Closed(Open Collector Output)
• Normally High, 5V / Normally Low, 0V(Digital Output)
• Make / Break via TransistorPANEL CUTOUTS:0.748 0.000+0.01019.00 0.00+0.25
ENVIRONMENTAL SPECIFICATIONS
• Operating Temperature Range: -40° C to +85° C (Typical)
• Storage Temperature Range: -60° C to +165° C (Typical)
• Relative Humidity: No Effect
• Ingress Protection: IP68 (submerged in 3 feet without apanel for 96 hours)
• SHock: Tested to 30g in each Axis(drop test from 20 ft to concrete)
• Vibration: Tested at 4 hours each Axis
(actuated during vibration)
• Impact: 1kg SHock Test